
MoreCare high pH adjuster is a pH regulator for swimming pools. It helps reduce the pH level thus increasing chorine’s stability and discourages rusting on metal plumbing and leeching of ceramic tiles.
Directions
Add a measure of the pH adjuster to water in bucket then add to pool.
Circulate the water for about 8 hours, test and repeat as necessary.
Dosage
Add a ½ Kg per 100,000 litres of pool water daily when your pH is above 7.0.
Precaution
– Wear rubber gloves and eye protection
– Keep out of reach of children
– Do not orally ingest
– Store in a cool dry place, away from flammable materials
– Do not mix with other chemicals
Ingredients
Sulphates, Sanitizers, Phosphates, carbonates & sequesetrants
Handling and Storage
Handing
MoreCare pH adjuster is suitable for use in adjusting high levels in swimming pools. The product is slightly basic, not corrosive user friendly, but in common with all chemicals, prolonged contact with the skin should be avoided; use of rubber gloves is recommended.
Do not mix with other chemicals unless recommended.
Wear appropriate safety gear clothing, do not eat or smoke whilst handling the product.
Storage
Shelf life of at least 48 months
Store in a cool dry environment and away from direct sunlight.
Re-seal /Stopper original containers tightly when not in use, do not return dispensed MoreCare pH adjuster into original container
Available Pack sizes: 5 kg, 10Kg 20 kg, 50kg
Why use Morecare high pH adjuster?
It reduces the pH level thus increasing chorine’s stability and discourages rusting on metal plumbing and leeching of ceramic tiles.
